Connections

The Viper water supply inlet is equipped with a 1/2” barbed fitting. Water supply lines are required to be ½ ID tubing along with appropriate sized connections. Two and three flavor Vipers require 100 GPH while four flavor Vipers require 150 GPH. As a general rule, if you can fill a 5 gallon bucket in 3 minutes you have enough water flow to be at 2.5 GPM. The incoming water flow should maintain a minimum of 65 psig dynamic pressure. If water pressure it low, the use of a water booster should be used. You must install a 50psi-65psi WPR prior to the Viper water inlet.